Digitex 300t xf Leica Geosystem

Digitex 300t xf Leica Geosystem

Digitex 300t xf 3 watt power signal transmitter.

The Digitex xf series signal transmitters are ideal for tracking buried loads over multiple distances.
They apply a signal on underground users that do not have a detectable signal, so it is possible to use a Digicat xf series locator to detect the signal induced by the Digitex transmitter.

These intelligent transmitters can be used:
- to track and identify users over long distances using additional lower frequencies
- allow depth estimation when using a depth-enabled cable locator
- allow identification of non-conductive users
- use a range of accessories to identify various types of users

Digitex 300t xf is a 3-watt signal transmitter with four frequencies. Designed to be compatible with the Digicat xf series trackers, it proves to be excellent for both everyday tasks and more complex checks.

Ideal for analyzing buried devices over long distances and in case of frequent detection work in areas with high signal interference.

With Digitex 300t xf you can customize frequencies based on your work area.
- Very robust design
- Compliance: IP65 (enclosure cover closed) - IP 54 (housing cover open)
- Four track signals available, based on frequency per location.
- Audio and video verification, you can view the power of the transmitter.
- Hardware and software analysis included in the system.
- Maximum power of 3 watts and additional frequency verification.
- Selection of additional frequencies: 512Hz & 640Hz for long tracks / 8kHz for medium tracks
- Operating temperature from -20 ° C to + 50 ° C
- Power supply: 4 x D alkaline
- Typical autonomy 30 hours
- Weight 2.5 kg approx (batteries included)
- Dimensions (mm) 105 x 190 x 235